WEWE Pull-Down Kitchen Faucet, Brushed Nickel, 3-Mode Sprayer, High Arc

The WEWE Pull-Down Kitchen Faucet is a high-arc, brushed nickel faucet for flexible everyday sink tasks, with a 360° swivel and three spray modes.

• 0.06-inch (1.52 mm) SUS 304 stainless steel body — a specified body thickness for daily kitchen use.
• Three modes and a CEC-listed 1.8 GPM (6.8 L/min) flow rate — switch between filling, rinsing and pausing water flow.
• Single-hole mounting for 1.30–1.50-inch (3.30–3.81 cm) openings — fits sinks within that range without a deck plate.
• 20-inch (50.8 cm) pull-down hose and 360° swivel — reach cookware and sink corners from different angles.
• Ceramic cartridge tested for 500,000 open-and-close cycles — supports repeated faucet operation.

For filling pots, rinsing food and washing deep cookware, a faucet needs to reach beyond the base of the sink and offer control over the water stream. WEWE combines a pull-down sprayer with three selectable modes and a high-arc shape for everyday kitchen tasks, while its single-hole mounting dimensions help establish whether it suits your sink before installation.

What can the three spray modes do?

The sprayer switches between STREAM for filling pots, SPRAY for rinsing and PAUSE for temporarily controlling water flow during use. Its CEC-listed flow rate is 1.8 GPM (6.8 L/min), and soft silicone nozzles are designed to help reduce limescale buildup. The sprayer head is ABS and meets NSF/ANSI 61 requirements.

• STREAM directs water for filling.
• SPRAY supports rinsing tasks.
• PAUSE provides temporary flow control.

Will this faucet fit my kitchen sink?

It is designed for a modern, single-hole sink with a mounting opening from 1.30 to 1.50 inches (3.30 to 3.81 cm), including a standard 1-3/8-inch (3.49 cm) opening. The countertop can be up to 1.76 inches (4.47 cm) thick, and the inlet connection is standard 3/8 inch (9.5 mm). A deck plate is not included, so the installation is for a single-hole setup without one.

The high arc swivels 360° and the pull-down hose extends 20 inches (50.8 cm) to help direct the sprayer toward deep cookware and sink corners. A gravity-ball mechanism guides the sprayer back after use.

• Compare your sink opening and countertop thickness with the stated limits.
• Use the standard 3/8-inch inlet connection for the water supply.

What is involved in installing and using it?

The pull-down hose and braided supply hoses come preinstalled to simplify work beneath the sink; most setups take about 15 minutes, with no plumber needed. The cold supply hose is 31.5 inches (80.0 cm) long, 6.9 inches (17.5 cm) longer than the 24.6-inch (62.5 cm) standard reference. The hot hose is 29.5 inches (74.9 cm), 4.7 inches (11.9 cm) longer than the 24.8-inch (63.0 cm) standard reference.

TWIST-LOCK tightening is tool-free. The pull-out hose is PE corrugated, while the supply hoses use high-temperature PEX cores and 304 stainless steel braided sleeves. These hose layers are designed to support durability and leak-resistant performance.

• Preinstalled hoses reduce the amount of under-sink setup.
• Tool-free TWIST-LOCK tightening secures the faucet mount.

What materials and surface features does it have?

The main body is thickened SUS 304 stainless steel, with a stated 0.06-inch (1.52 mm) body thickness. The faucet was tested to meet cUPC and NSF/ANSI 61 and 372 requirements and complies with U.S. SDWA standards. Its lead content is 97.16% below the stated limit of ≤0.25%.

A passivation treatment helps improve surface stability and corrosion resistance. The brushed nickel finish has a textured appearance intended to make everyday marks and splash streaks less noticeable. The tulip-style design is made to coordinate with most sinks.

• A ceramic cartridge was tested through 500,000 opening and closing cycles.
• Easy-clean silicone nozzles help reduce limescale buildup.

This WEWE faucet suits kitchens with a compatible single-hole sink where pull-down reach, selectable water modes and a high-arc swivel are useful for everyday washing and filling. Its SUS 304 steel body, three-mode sprayer and stated mounting limits make its materials, functions and fit clear for choosing a faucet.