Pool Mate Pool Stabilizer and Conditioner, 7 lb Cyanuric Acid Treatment

Pool Mate 7 lb (3.2 kg) Pool Stabilizer and Conditioner is a cyanuric acid treatment for pool water that helps protect chlorine from sunlight and maintain disinfectant effectiveness.

• Cyanuric acid pool stabilizer — helps reduce chlorine loss caused by sunlight.
• Reduces chlorine consumption by up to 25% — helps limit chlorine loss in pool water.
• Recommended stabilizer range of 40–100 ppm — gives you a target for testing and adjustment.
• 6 oz (170 g) raises cyanuric acid by 10 ppm in 5,000 gallons (18,927 L) — provides a dosing reference for pool volume.
• Rapid dispersal — establishes chlorine protection quickly.

Sunlight can contribute to chlorine loss in pool water, so maintaining stabilizer is part of managing a pool’s disinfectant level. Pool Mate is made for pool owners who are starting with new or refilled water, or whose water has no stabilizer, as well as those testing and adjusting an existing stabilizer level. It stabilizes pool water, extends disinfectant life, and improves chlorine effectiveness.

What does Pool Mate Pool Stabilizer and Conditioner do?

Pool Mate adds cyanuric acid to pool water to help reduce chlorine loss due to sunlight. Its rapid dispersal is designed to establish chlorine protection quickly, while stabilizing the water and extending the life of the disinfectant. The product can also reduce chlorine consumption by up to 25%.

• Made for swimming pool water.
• Use a reliable test kit to measure the stabilizer concentration before adjusting it.

How much Pool Mate should I use?

For new or refilled pool water, or water with no stabilizer, add 4 oz (113 g) per 1,000 gallons (3,785 L) to reach the desired stabilizer range of 40–100 ppm. For other adjustments, use the pool-water test result and the included chart to determine the amount needed.

• Measure the pool’s stabilizer concentration with a reliable test kit.
• The dosage reference is 6 oz (170 g) per 5,000 gallons (18,927 L) for a 10 ppm increase.

How do I add Pool Mate to pool water?

Add Pool Mate slowly into the skimmer, or premix it in a pail of warm water and then add the mixture directly to the skimmer. Make sure the filter is clean before treatment, then recirculate the water continuously for 24 hours so the product can dissolve completely.

• After treatment, maintain chlorine residual at 2.0–4.0 ppm.
• Keep pool pH at 7.4–7.6.

Pool Mate suits pool owners who want to manage cyanuric acid levels and reduce chlorine loss from sunlight, including when filling a new pool or refilling one without stabilizer. Its pool-specific dosing guidance, test-kit-based adjustment, and skimmer application make it a practical fit for routine pool water care.