LET'S RESIN Crystal Clear Epoxy Casting Resin, 34 oz Beginner Kit with UV Protection

LET'S RESIN Crystal Clear Epoxy Resin is a beginner-friendly casting kit for resin art, with 34 oz (1,005 mL) total of resin and hardener and a UV-stabilized, anti-yellowing formula.

• 17 oz (503 mL) resin plus 17 oz (503 mL) hardener — provides a 1:1 volume mix for casting projects.
• UV-stabilized, low-viscosity formula — helps create a clear, high-gloss finish while bubbles can escape naturally.
• Six 5 g mica powders and mixing supplies — gives beginners core materials for getting started.
• Ultra-low-odor formula with quality certifications — supports a more comfortable resin-art setup.
• Designed for jewelry, coasters, keychains, and silicone molds — suits a range of small resin crafts.

This kit brings the resin, hardener, color powders, and basic mixing tools together for makers learning to cast or add a glossy finish to resin art. Its simple volume-based mixing process is intended to make small craft projects easier to approach, from jewelry pieces to coasters and keychains.

What comes in the LET'S RESIN epoxy resin kit?

The kit contains 17 oz (503 mL) of resin, 17 oz (503 mL) of hardener, six 5 g mica powders in six colors, four 8 oz (237 mL) measuring cups, ten disposable cups, and four mixing sticks. The included colors and tools let you measure, mix, and tint resin for craft projects.

• Six mica powder colors for adding color to resin.
• Four measuring cups, ten disposable cups, and four mixing sticks.

How do you mix and cure this casting resin?

Measure resin and hardener in a 1:1 volume ratio, stir slowly for five minutes, then pour. The resin is designed to cure fully in 24 hours into a hard, long-lasting, high-gloss finish; actual curing time can vary with mold size and room temperature.

• If a piece is not set after 24 hours, allow more curing time.
• For large or deep pours, test a small batch first.

Which projects is this resin made for?

LET'S RESIN casting resin is intended for jewelry, coasters, keychains, silicone molds, and other resin-art projects; it is not suitable for tumbler projects. Its low-viscosity formula allows bubbles to escape naturally, while the UV-stabilized formula is designed to maintain a crystal-clear appearance over time and resist yellowing.

• Use at room temperature; resin can thicken naturally in cold weather.
• To warm cold bottles, place both in 122°F (50°C) water for 5–10 minutes before use.

LET'S RESIN brings eight years of epoxy-resin expertise and is trusted by thousands of artists and DIY enthusiasts worldwide. The formula is ultra-low odor and meets quality certifications, with no specific certification named. It is suited to beginners and experienced makers working on small cast pieces and other resin art—not tumbler projects. For makers who want a clear, glossy casting finish, the kit combines a measured 1:1 resin system with pigments and mixing supplies.