Kidde Kitchen and Home Fire Extinguisher Set, 2-Piece with Grease-Fire Nozzle

The Kidde Kitchen + Home Fire Extinguisher Set pairs a red 1-A:10-B:C extinguisher for common household fires with a white kitchen extinguisher featuring a flared nozzle designed to reduce oil splashing during grease fires.

• Two extinguishers for residential use — keep a general-purpose unit and a kitchen-focused unit available at home.
• Red extinguisher rated 1-A:10-B:C — for Class A combustibles, Class B fires and Class C electrical equipment fires.
• White extinguisher has a flared nozzle — designed to reduce oil splashing when fighting cooking grease fires.
• 2.5 lb (1.13 kg) of agent in each cylinder — monoammonium phosphate in the red unit and sodium bicarbonate in the white unit.
• UL Listed, with wall mount and UL-approved strap bracket included — supports wall-mounted storage.
• Easy-to-read pressure indicators and pull safety pins — help with readiness checks and access.

This two-piece set is made for residential fire preparedness, including homes where cooking grease and everyday combustibles are concerns. The red extinguisher addresses specified Class A, B and C fire categories, while the white unit has a nozzle designed for grease fires in the kitchen. Both units are for residential use only.

What fires is each Kidde extinguisher designed for?

The red Kidde extinguisher is rated 1-A:10-B:C for basic fires involving trash, wood and paper, cooking grease, liquids and gases, and electrical equipment. The white kitchen unit is specifically designed for grease fires and has a flared nozzle intended to reduce oil splashing. Each extinguisher contains a different dry chemical agent suited to its design.

• Red agent: monoammonium phosphate.
• White agent: sodium bicarbonate.
• Both agents are non-toxic but may cause skin irritation.

What is included, and how are the extinguishers mounted?

The set contains two Kidde extinguishers, a wall mount and a UL-approved strap bracket. Each unit has a corrosion-resistant aluminum cylinder, painted steel handle, metal valve assembly and impact-resistant handle. Each extinguisher weighs 3.9 lb (1.77 kg), and each cylinder holds 2.5 lb (1.13 kg) of firefighting agent.

The safety pin is designed for easy pulling, and an easy-to-read pressure indicator shows whether an extinguisher is charged and ready for use. An instruction label gives operating steps, and each unit has a bilingual nameplate. These features help make the equipment and its operating guidance accessible during home preparation.

• Two extinguishers are included in the set.
• Wall mount and strap bracket are included.
• Both units operate at 100 PSI.

How do you use the Kidde extinguishers?

Use the PASS sequence printed in the instructions: pull the pin, aim at the base of the fire, squeeze the lever and handle, then sweep from side to side. The red unit discharges for 8–12 seconds across a 6–8 ft (1.8–2.4 m) range. The white unit discharges for 8–10 seconds across a 5 ft (1.5 m) range.

Both extinguishers are single-use. Dispose of and replace a unit after it has been used or discharged, or when it is over 12 years old. The set has a 6-year limited manufacturer's warranty.

• Follow the PASS steps: pull, aim, squeeze and sweep.
• Use and store the set for residential purposes.
• Replace each extinguisher after discharge or when it is over 12 years old.

Who is this two-extinguisher set suited to?

This Kidde set suits households preparing for both common household fire categories and cooking-related grease fires, with separate extinguishers designed for those roles. It is intended for residential use, and the extinguishers are single-use rather than refillable for repeated use. The wall mount and included strap bracket support keeping the units mounted at home, while the pressure indicators provide a visible charge check.

For householders who want a dedicated kitchen extinguisher alongside a red unit rated for Class A, B and C fires, this set combines both roles with included mounting hardware and clear operating guidance.